1-5
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all DHCPv6 snooping entries.
<Sysname>display dhcp-snooping ipv6 all
DHCP-Snooping IPV6 is enabled.
The client binding table for all untrusted ports.
Type : T--True , F--False
Unit ID : 1
Type IP Address MAC Address Remaining VLAN Interface
lease
==== ========================= =============== ========= ==== =================
--- 0 dhcp-snooping Ipv6 item(s) of unit 1 found ---
display dns ipv6 dynamic-host
Syntax
display dns ipv6 dynamic-host
View
Any view
Parameters
None
Description
Use the display dns ipv6 dynamic-host command to display IPv6 dynamic domain name information
in the cache, including the domain name, IPv6 address, and TTL of the DNS entries.
You can use the reset dns ipv6 dynamic-host command to clear all IPv6 dynamic domain name
information from the cache.
Examples
# Display IPv6 dynamic domain name information in the cache.
<Sysname> display dns ipv6 dynamic-host
No. Domain-name IPv6 Address TTL
1 aaa 2001::2 6
Table 1-1 Description on the fields of the display dns ipv6 dynamic-host command
Field Description
No. Sequence number
Domain-name Domain name
IPv6 Address IPv6 address of the corresponding domain name
TTL Time-to-live of the domain name in the cache in seconds
To Next Page
Loading...
Need help?
General