4-4
Table 4-2 Description on the fields of the display bootp client command
Field Description
Vlan-interface1
VLAN-interface 1 is configured to obtain an IP
address through BOOTP.
Allocated IP IP address allocated to the VLAN interface
Transaction ID Value of the XID field in BOOTP packets
Mac Address MAC address of the BOOTP client
Default router Default router
ip address bootp-alloc
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
VLAN interface view
Parameters
None
Description
Use the ip address bootp-alloc command to configure a VLAN interface to obtain an IP address
through BOOTP.
Use the undo ip address bootp-alloc command to cancel the configuration.
By default, a VLAN interface does not use BOOTP to obtain an IP address.
Related commands: display bootp client.
Examples
# Configure VLAN-interface 1 to obtain an IP address through BOOTP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ip address bootp-alloc
To Next Page
Loading...
Need help?
General