H3C S3100 Series

2-25
z This command works on MLD snooping–enabled VLANs.
z This command cannot clear MLD snooping multicast group information of static joining.
Examples
# Clear all MLD snooping multicast group information.
<Sysname> reset mld-snooping group all
reset mld-snooping statistics
Syntax
reset mld-snooping statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset mld-snooping statistics command to clear the statistics information of MLD messages
learned by MLD snooping.
Examples
# Clear the statistics information of all kinds of MLD messages learned by MLD snooping.
<Sysname> reset mld-snooping statistics
router-aging-time (MLD-Snooping view)
Syntax
router-aging-time interval
undo router-aging-time
View
MLD-Snooping view
Default Level
2: System level
Parameters
interval: Dynamic router port aging time, in seconds. The effective range is 1 to 1,000.
Description
Use the router-aging-time command to configure the aging time of dynamic router ports globally.
Use the undo router-aging-time command to restore the default setting.
By default, the dynamic router port aging time is 260 seconds.
This command works on MLD snooping–enabled VLANs.
Related commands: mld-snooping router-aging-time.