1-19
Only H3C S3100-EI series switches support this command.
Example
# Mirror packets that match ACL 2000 on port Ethernet 1/0/1 to Ethernet 1/0/4 through traffic mirroring
(assuming that the current device is an S3100-EI series switch).
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 1.1.1.1 0
[Sysname-acl-basic-2000] quit
[Sysname] interface Ethernet 1/0/4
[Sysname-Ethernet1/0/4] monitor-port
[Sysname-Ethernet1/0/4] quit
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] mirrored-to inbound ip-group 2000 monitor-interface
# Display the traffic mirroring configuration of Ethernet 1/0/1.
[Sysname-Ethernet1/0/1] display qos-interface Ethernet 1/0/1 mirrored-to
Ethernet1/0/1: mirrored-to
Inbound:
Matches: Acl 2000 rule 1 running
Mirrored to: monitor interface
mirrored-to vlan
Syntax
mirrored-to vlan vlan-id inbound acl-rule { cpu | monitor-interface }
undo mirrored-to inbound acl-rule
View
System view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4,094.
inbound: Mirrors the inbound packets.
acl-rule: ACL rules to be applied. This argument can be the combination of multiple ACLs. For more
information about this argument, refer to
Table 1-9 and Table 1-10. Note that the ACL rules referenced
must be those defined with the permit keyword specified.
cpu: Duplicates the packets to the CPU.
monitor-interface: Duplicates the packets to the destination mirroring port.
To Next Page
Loading...
Need help?
General