H3C S3100 Series - Port-Security Port-Mode

1-14
Description
Use the port-security oui command to set an OUI value for authentication.
Use the undo port-security oui command to cancel the OUI value setting.
By default, no OUI value is set for authentication.
z The OUI value set by this command takes effect only when the security mode of the port is set to
userLoginWithOUI by the port-security port-mode command.
z The OUI value set by this command cannot be a multicast MAC address.
Related commands: port-security port-mode.
Examples
# Configure an OUI value of 00ef-ec00-0000, setting the OUI index to 5.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-security oui 00ef-ec00-0000 index 5
port-security port-mode
Syntax
port-security port-mode { autolearn | mac-and-userlogin-secure | mac-and-userlogin-secure-ext
| mac-authentication | mac-else-userlogin-secure | mac-else-userlogin-secure-ext | secure |
userlogin | userlogin-secure | userlogin-secure-ext | userlogin-secure-or-mac |
userlogin-secure-or-mac-ext | userlogin-withoui }
undo port-security port-mode
View
Ethernet port view
Parameters
Table 1-3 shows the description on the security mode keywords.