1-23
Description
Use the display udp ipv6 statistics command to display statistics of IPv6 UDP packets.
You can use the reset udp ipv6 statistics command to clear statistics of all IPv6 UDP packets.
Examples
# View statistics of IPv6 UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 10
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 21
Table 1-16 Description on the fields of the display udp ipv6 statistics command
Field Description
Total Total number of received/sent packets
checksum error Total number of packets with an invalid checksum
shorter than header
Total number of IPv6 UDP packets whose total length is less
than that specified by the packet header
data length larger than packet
Total number of packets whose data length exceeds that
specified by the packet header
unicast(no socket on port)
Total number of received unicast packets without any socket on
a port
broadcast/multicast(no socket on port)
Total number of received broadcast/multicast packets without
any socket on a port
not delivered, input socket full
Number of packets not handled because of the receiving buffer
being full
input packet missing pcb cache
Number of packets that do not match any entry in the PCB
cache
dns server ipv6
Syntax
dns server ipv6 ipv6-address [ interface-type interface-number ]
undo dns server ipv6 ipv6-address [ interface-type interface-number ]
View
VLAN interface view
Parameters
ipv6-address: IPv6 address of a DNS server.
interface-type interface-number: Interface type and interface number. It is required when the IPv6
address of the specified DNS server is a link-local address.
To Next Page
Loading...
Need help?
General