H3C S3100 Series - MAC Address Authentication Enhanced Function Configuration Commands

1-10
z The offline detect timer configured in system view applies to all MAC authentication-enabled ports.
z The offline detect timer configured in Ethernet port view applies to the current port only. You can
set the offline detect timer to different values on different Ethernet ports.
z The offline detect timer configured in Ethernet port view takes precedence over the one configured
in system view.
z If the offline-detect-value argument takes the value of 0, the offline detect timer is disabled.
Examples
# Set the offline detect timer for MAC authentication to 500 seconds on port Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mac-authentication timer offline-detect 500
reset mac-authentication
Syntax
reset mac-authentication statistics [ interface interface-list ]
View
User view
Parameters
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argument
in the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] }
&<1-10>, where &<1-10> means that you can provide up to 10 port indexes/port index ranges for this
argument.
Description
Use the reset mac-authentication command to clear the MAC address authentication statistics. With
the interface keyword specified, the command clears the MAC address authentication statistics of the
specified port. Without this keyword, the command clears the global MAC address authentication
statistics.
Examples
# Clear the MAC address authentication statistics for port Ethernet 1/0/1.
<Sysname> reset mac-authentication statistics interface Ethernet 1/0/1
MAC Address Authentication Enhanced Function Configuration
Commands
mac-authentication auth-fail
Syntax
mac-authentication auth-fail vlan authfail-vlan-id
undo mac-authentication auth-fail vlan