1-2
Description
Use the display dns dynamic-host command to display the information in the dynamic domain name
cache.
Examples
# Display the information in the dynamic domain name cache.
<Sysname> display dns dynamic-host
No Domain-name ---> Ipaddress TTL Alias
1 lm.test.h3c 172.1.223.1 3564
No Domain-name <--- Ipaddress TTL Alias
1 aaaa 172.1.223.2 3594
Table 1-2 Description on the fields of the display dns dynamic-host command
Field Description
No Sequence number
Domain-name Domain name
Ipaddress IP address of the corresponding domain name
TTL Time for which an entry is cached in seconds.
Alias Alias for the domain name. There can be four aliases at most.
--->
<---
DNS resolution has two types:
Forward resolution: domain name--->IP address
Reverse resolution: IP address--->domain name
display dns server
Syntax
display dns server [ dynamic ]
View
Any view
Parameters
dynamic: Displays the DNS Server information dynamically obtained through DHCP or other protocols.
Description
Use the display dns server command to display the DNS Server information.
Related commands: dns server.
Examples
# Display the DNS Server information.
<Sysname> display dns server
Type:
To Next Page
Loading...
Need help?
General