4-6
Field Description
ACL's step is 5 The rules in this ACL are numbered in steps of 5.
5 times matched
There have been five matches for the rule. Only IPv6
ACL matches performed by software are counted.
This field is not displayed when no match is found.
rule 0 comment This rule is used in GE 1/0/1
The description of ACL rule 0 is "This rule is used in
GE 1/0/1."
This field is not displayed when the rule has no
description or the
slot
slot-number combination is
provided in the command.
reset acl ipv6 counter
Syntax
reset acl ipv6 counter { acl6-number | all | name acl6-name }
View
User view
Default Level
2: System level
Parameters
acl6-number: IPv6 ACL number, which must be in the following ranges:
z 2000 to 2999 for basic IPv6 ACLs,
z 3000 to 3999 for advanced IPv6 ACLs.
all: Specifies all basic and advanced IPv6 ACLs.
name acl6-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be named all to avoid confusion.
Description
Use the reset acl ipv6 counter command to clear statistics on a specified IPv6 ACL or all basic and
advanced IPv6 ACLs.
Examples
# Clear the statistics on IPv6 ACL 2001.
<Sysname> reset acl ipv6 counter 2001
# Clear the statistics on IPv6 ACL flow.
<Sysname> reset acl ipv6 counter name flow
rule (basic IPv6 ACL view)
Syntax
rule [ rule-id ] { deny | permit } [ counting | fragment | logging | source { ipv6-address prefix-length |
ipv6-address/prefix-length | any } | time-range time-range-name ] *
undo rule rule-id [ counting | fragment | logging | source | time-range ] *
To Next Page
Loading...
Need help?
General