EasyManuals Logo

H3C S3100 Series Command Manual

H3C S3100 Series
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
1-10
**Destination: 127.0.0.1 Mask: 255.255.255.255
Protocol: #DIRECT Preference: 0
*NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0)
State: <NotInstall NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 57:12 Cost: 0/0
The statistics of the routing table are displayed first, and then the detailed descriptions of each route.
Table 1-2 describes the route states and Table 1-5 describes the statistics information about the routing
table.
Table 1-5 Description on the fields of the display ip routing-table verbose command
Field Description
Holddown Number of the routes that are held down
Delete Number of the deleted routes
Hidden Number of the hidden routes
ip route-static
Syntax
ip route-static ip-address { mask | mask-length } { interface-type interface-number | next-hop }
[ preference preference-value ] [ reject | blackhole ] [ description text ]
undo ip route-static ip-address { mask | mask-length } [ interface-type interface-number | next-hop ]
[ preference preference-value ]
View
System view
Parameter
ip-address: Destination IP address, in dotted decimal notation.
mask: IP address mask, in dotted decimal notation.
mask-length: Mask length, in the range of 0 to 32.
interface-type interface-number: Next hop outgoing interface. Currently, you can specify a NULL
interface only. A null interface is a virtual interface. Packets destined for a null interface are discarded,
helping to reduce system load.
next-hop: IP address of the next hop of this route, in dotted decimal notation.
preference-value: Preference of this route, in the range of 1 to 255.
reject: Specifies the route as an unreachable route. When a static route destined for a destination
address is of the reject attribute, all the IP packets destined for the destination address are discarded,
and the source host is informed that the destination address is unreachable.
blackhole: Specifies the route as a black hole route. When a static route destined for a destination
address is of the blackhole attribute, the outgoing interface of the route is Null 0 regardless of the next
hop address. All the IP packets destined for the destination address are discarded, and the source host
is not informed that the destination address is unreachable.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals