1-8
format
Syntax
format device
View
User view
Parameter
device: Name of a device which must be “unit1>flash:” or “flash:” for S3100 series Ethernet switches.
Description
Use the format command to format the Flash memory.
The format operation clears all the files on the Flash memory, and the operation is irretrievable.
Example
# Format the Flash memory.
<Sysname>format unit1>flash:
All data on unit1>flash: will be lost , proceed with format ? [Y/N]:y
..............................
%Format unit1>flash: completed.
mkdir
Syntax
mkdir directory
View
User view
Parameter
directory: Name of a directory.
Description
Use the mkdir command to create a subdirectory in the specified directory of a Flash memory.
Note that:
z The name of the subdirectory to be created must be unique under the specified directory.
Otherwise, you will fail to create the subdirectory under the directory.
z To use this command to create a subdirectory, the specified directory must exist. For instance, to
create subdirectory flash:/test/mytest, the test directory must exist. Otherwise, you will fail to
create the subdirectory.
Example
# Create a directory in the current directory, with the name being test.
To Next Page
Loading...
Need help?
General