H3C S3100 Series Command Manual

1-22
Field Description
established connections Number of established connections
Closed connections Number of closed connections
dropped
Number of dropped connections (after receiving SYN
from the peer)
initiated dropped
Number of connection failures (before receiving SYN
from the peer)
display tcp ipv6 status
Syntax
display tcp ipv6 status
View
Any view
Parameters
None
Description
Use the display tcp ipv6 status command to display the IPv6 TCP connection status, including IP
address of the IPv6 TCP control block, local and peer IPv6 addresses, and status of the IPv6 TCP
connection.
Examples
# View the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
TCP6CB Local Address Foreign Address State
83a9fba4 ::->23 ::->0 Listening
Table 1-15 Description on the fields of the display tcp ipv6 status command
Field Description
TCP6CB IPv6 address of the TCP control block (hexadecimal)
Local Address Local IPv6 address
Foreign Address Remote IPv6 address
State
TCP connection status, including: Closed, Listening, Syn_Sent, Syn_Rcvd,
Established, Close_Wait, Fin_Wait1, Closing, Last_Ack, Fin_Wait2, Time_Wait
display udp ipv6 statistics
Syntax
display udp ipv6 statistics
View
Any view
Parameters
None

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English