EasyManuals Logo

H3C S3100 Series Command Manual

H3C S3100 Series
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1061 background imageLoading...
Page #1061 background image
2-3
Parameters
remote-system: IPv6 address or host name (a string a 1 to 46 characters) of the destination device.
-i interface-type interface-number: Specifies the type and number of an outgoing interface. This
argument takes effect only when the destination address is a link-local address and the specified
outgoing interface has a link-local address.
port-number: Specifies the port number linked with a Telnet server, ranging from 0 to 65535, with the
default of 23.
Description
Use the telnet ipv6 command to log onto another device for remote management from the local device.
You can break Telnet logging-in by entering <Ctrl+K>.
Examples
# Connect to a remote Telnet server with IPv6 address of 3001::1.
<Sysname> telnet ipv6 3001::1
Trying 3001::1 ...
Press CTRL+K to abort
Connected to 3001::1 ...
****************************************************************************
* Copyright(c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
<Sysname>
# Telnet to a remote Telnet server with IPv6 address of 2003::5. If the connection fails, “Can't connect to
the remote host!” is displayed.
<Sysname> telnet ipv6 2003::5
Trying 2003::5 ...
Press CTRL+K to abort
Can't connect to the remote host!
tftp ipv6
Syntax
tftp ipv6 remote-system [ -i interface-type interface-number ] { get | put } source-filename
[ destination-filename ]
View
User view
Parameters
remote-system: IPv6 address or host name (a string a 1 to 46 characters) of the destination device.
-i interface-type interface-number: Specifies the type and number of an interface. This argument takes
effect only when the address of the TFTP server is a link-local address and the specified outgoing
interface has a link-local address.
get: Specifies to download a file.
put: Specifies to upload a file.
source-filename: Specifies the name of a source file with a string of 1 to 64 letters.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals