4-2
Table 4-1 Description on the fields of the display dhcp client command
Field Description
Vlan-interface1
VLAN interface operating as a DHCP client to
obtain an IP address dynamically
Current machine state The state of the client state machine
Allocated IP IP address allocated to the DHCP client
lease Lease period
T1 Renewal timer setting
T2 Rebinding timer setting
Lease from….to…. The starting and end time of the lease period
Server IP IP address of the DHCP server selected
Transaction ID Transaction ID
Default router Gateway address
Next timeout will happen after 0 days 11 hours
56 minutes 1 seconds.
The timer expires in 11 hours, 56 minutes, and 1
second.
ip address dhcp-alloc
Syntax
ip address dhcp-alloc
undo ip address dhcp-alloc
View
VLAN interface view
Parameters
None
Description
Use the ip address dhcp-alloc command to configure a VLAN interface to obtain an IP address
through DHCP.
Use the undo ip address dhcp-alloc command to cancel the configuration.
By default, a VLAN interface does not use DHCP to obtain an IP address.
To Next Page
Loading...
Need help?
General