1-8
View
Any view
Parameter
interface-type interface-number: Specifies the type and number of a port, for which the traffic mirroring
configuration information is to be displayed.
unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic mirroring configuration of all
the ports on the device is displayed.
Description
Use the display qos-interface mirrored-to command to display the traffic mirroring configuration of a
port or all the ports on the device.
Related command: mirrored-to.
Only H3C S3100-EI series switches support this command.
Example
# Display the traffic mirroring configuration of Ethernet 1/0/1 on an S3100-EI series switch.
<Sysname> display qos-interface Ethernet 1/0/1 mirrored-to
Ethernet1/0/1: mirrored-to
Inbound:
Matches: Acl 2000 rule 0 running
Mirrored to: monitor interface
Table 1-3 Description on the fields of the display qos-interface mirrored-to command
Field Description
Ethernet1/0/1: Port with traffic mirroring configured
Inbound
Inbound direction. That is, traffic mirroring is performed to the inbound
packets.
Matches Match rule used for traffic classification
Mirrored to
z “monitor interface” indicates that the packets are duplicated to a port.
z “cpu” indicates that the packets are duplicated to the CPU.
display qos-interface traffic-limit
Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-limit
View
Any view
To Next Page
Loading...
Need help?
General