1-13
Example
# Display the traffic shaping configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 traffic-shape
Ethernet1/0/1
QID: status max-rate(kbps) burst-size(byte)
----------------------------------------------------
0 : Enable 64 8
1 : Enable 64 8
2 : Enable 640 16
3 : Disable 0 0
Table 1-7 Description on the fields of the display qos-interface traffic-shape command
Field Description
Ethernet1/0/1 Port with traffic shaping configured
QID Queue ID
status traffic shaping status of a queue
max-rate(kbps) Maximum traffic rate of a queue
burst-size(byte) Burst size of a queue
display qos-interface traffic-statistic
Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-statistic
View
Any view
Parameter
interface-type interface-number: Specifies the type and number of a port, for which the traffic
accounting configuration information is to be displayed.
unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic accounting configuration of
all the ports on the device is displayed.
Description
Use the display qos-interface traffic-statistic command to display the traffic accounting configuration
of a port or all the ports on the device. This command also displays traffic statistics.
Related command: traffic-statistic.
To Next Page
Loading...
Need help?
General