1-6
lacp system-priority
Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Parameter
system-priority: System priority, ranging from 0 to 65,535.
Description
Use the lacp system-priority command to set the system priority.
Use the undo lacp system-priority command to restore the default system priority.
By default, the system priority is 32,768.
Example
# Set the system priority to 64.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] lacp system-priority 64
link-aggregation group description
Syntax
link-aggregation group agg-id description agg-name
undo link-aggregation group agg-id description
View
System view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 52.
agg-name: Aggregation group name, a string of 1 to 32 characters.
Description
Use the link-aggregation group description command to set a description for an aggregation group.
Use the undo link-aggregation group description command to remove the description of an
aggregation group.
If you have saved the current configuration with the save command, after system reboot, the
configuration concerning manual and static aggregation groups and their descriptions still exists, but
that of the dynamic aggregation groups and their descriptions gets lost.
To Next Page
Loading...
Need help?
General