H3C S3100 Series Command Manual

1-3
Table 1-1 display igmp-snooping group command output description
Field Description
Total 1 IP Group(s).
Total number of IPv6 multicast groups
Total 1 IP Source(s).
Total number of IPv6 multicast sources
Total 1 MAC Group(s).
Total number of MAC multicast groups
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Port flags: D for dynamic port, S for static port, C for port copied from a (*, G)
entry to an (S, G) entry
Router port(s)
Number of router ports
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or router
port.
IP group address Address of IPv6 multicast group
(::, FF1E::101)
(S, G) entry, :: represents all the multicast sources
MAC group address
Address of MAC multicast group
Attribute
Attribute of IPv6 multicast group
Host port(s)
Number of member ports
display igmp-snooping statistics
Syntax
display igmp-snooping statistics
View
Any view
Parameters
None
Description
Use the display igmp-snooping statistics command to display IGMP Snooping statistics.
This command displays the following information: the numbers of the IGMP general query messages,
IGMP group-specific query messages, IGMPv1 report messages, IGMPv2 report messages, IGMP
leave messages and error IGMP packets received, and the number of the IGMP group-specific query
messages sent.
When IGMPv3 Snooping is enabled, the device makes statistics of IGMPv3 messages as IGMPv2
messages.
Related commands: igmp-snooping.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English