1-11
<Sysname> display link-delay
Interface Time Delay
===================== ==============
Ethernet1/0/5 8
display loopback-detection
Syntax
display loopback-detection
View
Any view
Parameter
None
Description
Use the display loopback-detection command to display the loopback detection status on the port. If
loopback detection is enabled, this information will also be displayed: time interval for loopback
detection and the loopback ports.
Example
# Display the loopback detection status on the port.
<Sysname> display loopback-detection
Port Ethernet1/0/1 loopback-detection is running
system Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link
Table 1-4 display loopback-detection command output description
Field Description
Port Ethernet1/0/1 loopback-detection is running Loopback detection is enabled on Ethernet 1/0/1.
system Loopback-detection is running Loopback detection is enabled globally.
Detection interval time is 30 seconds Time interval for loopback detection is 30 seconds.
There is no port existing loopback link No loopback port exists.
display port combo
Syntax
display port combo
View
Any view
Parameter
None.
Description
Use the display port combo command to display the combo ports on the current device.
To Next Page
Loading...
Need help?
General