H3C S3100 Series Command Manual

4-1
4 System-Guard Configuration Commands (For
S3100-EI)
The command introduced in this chapter is only supported by the S3100-EI series switches.
System-Guard Configuration Commands
display system-guard attack-record
Syntax
display system-guard attack-record
View
Any view
Parameter
None
Description
Use the display system-guard attack-record command to display the record of detected attacks.
Example
# Display the record of detected attacks.
<Sysname> display system-guard attack-record
Target No. : 1
Range : 2
Packet type : BOGUS
Port : 1
MAC address : 00e0-fc00-0001
IP address : 10.10.10.10
Alive time : 6

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English