1-16
View
FTP client view
Parameters
None
Description
Use the quit command to terminate FTP control connection and FTP data connection and return to user
view.
This command has the same effect as that of the bye command.
Examples
# Terminate the FTP control connection and FTP data connection and return to user view.
[ftp] quit
221 Server closing.
<Sysname>
remotehelp
Syntax
remotehelp [ protocol-command ]
View
FTP client view
Parameters
protocol-command: FTP protocol command.
Description
Use the remotehelp command to display the help information about an FTP protocol command.
This command works only when the FTP server provides the help information about FTP protocol
commands.
z This command is always valid when an H3C series Ethernet switch operates as the FTP server.
z If you use other FTP server software, refer to related instructions to know whether the FTP server
provides help information about FTP protocol commands.
Examples
# Display the syntax of the user command.
[ftp] remotehelp user
214 Syntax: USER <sp> <username>
To Next Page
Loading...
Need help?
General