1-1
1 SNMP Configuration Commands
SNMP Configuration Commands
display snmp-agent
Syntax
display snmp-agent { local-engineid | remote-engineid }
View
Any view
Parameters
local-engineid: Displays the local SNMP entity engine ID.
remote-engineid: Displays all the remote SNMP entity engine IDs. At present, the device does not
support application of the keyword.
Description
Use the display snmp-agent command to display the local SNMP entity engine ID or all the remote
SNMP entity engine IDs.
Each device managed by the NMS needs a unique engine ID to identify an SNMP agent. By default,
each device has a default engine ID. You should ensure that each engine ID is unique within an SNMP
domain.
The creation of username and generation of cipher text password are related to engine ID in SNMPv3.
If you change an engine ID, the username and password configured on the agent with this engine ID
become invalid.
You can use the snmp-agent local-engineid command to configure an engine ID for the device.
Examples
# Display the local SNMP entity engine ID.
<Sysname> display snmp-agent local-engineid
SNMP local EngineID: 800007DB000FE20F12346877
SNMP local EngineID in the above information represents the local SNMP entity engine ID.
display snmp-agent community
Syntax
display snmp-agent community [ read | write ]
View
Any view
To Next Page
Loading...
Need help?
General