4-1
4 Scheduled Task Configuration Commands
Scheduled Task Configuration Commands
display job
Syntax
display job [ job-name ]
View
Any view
Default Level
1: Monitor level
Parameters
job-name: Name of a scheduled task, a string of 1 to 32 characters. When executed without the
job-name argument, the command displays configuration of all the scheduled tasks; when executed
with the job-name argument, the command displays the configuration of a specified task.
Description
Use the display job command to display configuration of a specified scheduled task.
Examples
# Display configurations of all scheduled tasks.
<System> dis job
Job name: phone
Specified view: Ethernet1/0/2
Time 1: Execute command poe enable at 08:00 Mondays Tuesdays Wednesdays Thursdays Fridays
Table 4-1 display job command output description
Field Description
Job name Name of a scheduled task
Specified view View where the specified command(s) are to be executed
Time time-id Time records for the commands in a scheduled task
Execute command Character string of the specified command(s)
job
Syntax
job job-name
undo job job-name
To Next Page
Loading...
Need help?
General