H3C S3100 Series Command Manual

1-38
Examples
# Clear all DHCPv6 snooping entries.
<Sysname>reset dhcp-snooping ipv6 all
reset dns ipv6 dynamic-host
Syntax
reset dns ipv6 dynamic-host
View
User view
Parameters
None
Description
Use the reset dns ipv6 dynamic-host command to clear IPv6 dynamic domain name cache
information.
You can use the display dns ipv6 dynamic-host command to display the current IPv6 dynamic
domain name cache information.
Examples
# Clear IPv6 dynamic domain name cache information.
<Sysname> reset dns ipv6 dynamic-host
reset ipv6 nd detection statistics
Syntax
reset ipv6 nd detection statistics [ interface interface-type interface-number ]
View
User view
Parameters
interface interface-type interface-number: Clear the statistics of specified interfaces. interface-type
interface-number: Specifies the interface type and number.
Description
Use the reset ipv6 nd detection statistics command to clear the statistics of ND detection.
Clear all the statistics of ND detection when no interface is specified.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Clear all the statistics of ND detection.
<Sysname> reset ipv6 nd detection statistics

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English