1-21
Examples
# Enable HWPing client.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping-agent enable
hwping-agent max-requests
Syntax
hwping-agent max-requests max-number
undo hwping-agent max-requests
View
System view
Parameters
max-number: Maximum number of concurrent tests, in the range of 1 to 5.
Description
Use the hwping-agent max-requests command to set the allowed maximum number of concurrent
tests.
Use the undo hwping-agent max-requests command to restore the default maximum number of
concurrent tests, that is, five tests.
This command applies to DHCP test only.
Examples
# Set the maximum number of concurrent tests to 4.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping-agent max-requests 4
jitter-interval
Syntax
jitter-interval interval
undo jitter-interval
View
HWPing test group view
Parameters
interval: Interval in milliseconds between jitter test packets. The value is in the range of 10 to 1000.
Description
Use the jitter-interval command to configure the interval between sending jitter test packets.
Use the undo jitter-interval command to restore the default.
To Next Page
Loading...
Need help?
General