1-17
display web package
Syntax
display web package
View
Any view
Parameter
None
Description
Use the display web package command to display information about the Web file used by the device,
including the name of the currently used Web file, and the name of the Web files with the main and
backup attributes used for next startup.
Example
# Display information about the Web file used by the device.
<Sysname>display web package
The current using web package is: flash:/h3c-http3.1.5-0040.web
The main web package is: unit1>flash:/h3c-http3.1.5-0040.web
The backup web package is: unit1>flash:/
startup bootrom-access enable
Syntax
startup bootrom-access enable
undo startup bootrom-access enable
View
User view
Parameter
None
Description
Use the startup bootrom-access enable command to specify a switch to prompt users to use
customized password to enter the BOOT menu.
Use the undo startup bootrom-access enable command to disable the above function.
By default, users have to use customized passwords to enter the BOOT menu.
You can use the display startup command in the Configuration File Management part of the manual to
view the execution results of these two commands.
Example
# Specify to prompt users to use customized passwords to enter the BOOT menu.
<Sysname> startup bootrom-access enable
<Sysname> display startup
UNIT 1:
Current Startup saved-configuration file: flash:/config.cfg
Next main startup saved-configuration file: flash:/config.cfg
To Next Page
Loading...
Need help?
General