1-19
domain delimiter
Syntax
domain delimiter { at | dot }
undo domain delimiter
View
System view
Parameters
at: Specifies “@” as the delimiter between the username and the ISP domain name.
dot: Specifies “.” as the delimiter between the username and the ISP domain name.
Description
Use the domain delimiter command to specify the delimiter form between the username and the ISP
domain name.
Use the undo domain delimiter command to restore the delimiter form to the default setting.
By default, the“@” character is used as the delimiter between the username and the ISP domain name.
z If you have configured to use "." as the delimiter, for a username that contains multiple ".", the first
"." will be used as the domain delimiter.
z If you have configured to use "@" as the delimiter, the "@" must not appear more than once in the
username. If “.” is the delimiter, the username must not contain any “@”.
Related commands: domain.
Examples
# Specify “.” as the delimiter between the username and the ISP domain name.
<Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[Sysname] domain delimiter dot
idle-cut
Syntax
idle-cut { disable | enable minute flow }
View
ISP domain view
To Next Page
Loading...
Need help?
General