1-16
Storage-type: nonVolatile
Acl:2001
snmp-agent local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
View
System view
Parameters
engineid: Engine ID, an even number of hexadecimal characters, in the range 10 to 64.
Description
Use the snmp-agent local-engineid command to set an engine ID for the local SNMP entity.
Use the undo snmp-agent local-engineid command to restore the default engine ID.
By default, the engine ID of an SNMP entity is formed by appending the device information to the
enterprise number. The device information can be determined according to the device, which can be an
IP address, a MAC address, or a user-defined string comprising of hexadecimal digits.
The configurations with the snmp-agent usm-user v3 and snmp-agent calculate-password
commands are related to engine ID. If you modify the engine ID, the corresponding configurations are
invalid for the new engine ID.
Examples
# Set the local SNMP entity engine ID to 123456789A.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent local-engineid 123456789A
snmp-agent log
Syntax
snmp-agent log { set-operation | get-operation | all }
undo snmp-agent log { set-operation | get-operation | all }
View
System view
Parameters
set-operation: Logs the set operations.
get-operation: Logs the get operations.
all: Logs both the set operations and get operations.
To Next Page
Loading...
Need help?
General