H3C S3100 Series Command Manual

2-13
total broadcast or multicast packets : 25006
no socket broadcast or multicast packets: 24989
not delivered, input socket full: 0
input packets missing pcb cache: 1314
Sent packets:
Total: 7187
Table 2-7 Description on the fields of the display udp statistics command
Field Description
Total Total number of received UDP packets
checksum error Total number of packets with incorrect checksum
shorter than header Number of packets with data shorter than header
data length larger than
packet
Number of packets with data longer than packet
no socket on port Number of unicast packets with no socket on port
total broadcast or multicast
packets
Total number of received broadcast or multicast
packets
no socket broadcast or
multicast packets
Total number of broadcast or multicast packets without
socket on port
not delivered, input socket
full
Number of not delivered packets due to a full socket
cache
Received
packets:
input packets missing pcb
cache
Number of packets without matching PCB cache
Sent
packets:
Total Total number of UDP packets sent
icmp redirect send
Syntax
icmp redirect send
undo icmp redirect send
View
System view
Parameters
None
Description
Use the icmp redirect send command to enable the device to send ICMP redirection packets.
Use the undo icmp redirect send command to disable the device from sending ICMP redirection
packets.
By default, the device is enabled to send ICMP redirection packets.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English