H3C S3100 Series Command Manual

1-16
enable log updown
Syntax
enable log updown
undo enable log updown
View
Ethernet port view
Parameter
None
Description
Use the enable log updown command to enable Up/Down log information output.
Use the undo log enable updown command to disable Up/Down log information output.
By default, a port is allowed to output Up/Down log information.
Example
# By default, a port is allowed to output the Up/Down log information. Execute the shutdown command
or the undo shutdown command on Ethernet 1/0/1, and the system outputs Up/Down log information
of Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] shutdown
%Apr 5 07:25:37:634 2000 Sysname L2INF/5/PORT LINK STATUS CHANGE:- 1 -
Ethernet1/0/1 is DOWN
[Sysname-Ethernet1/0/1] undo shutdown
%Apr 5 07:25:56:244 2000 Sysname L2INF/5/PORT LINK STATUS CHANGE:- 1 -
Ethernet1/0/1 is UP
# Disable Ethernet 1/0/1 from outputting Up/Down log information, execute the shutdown command or
the undo shutdown command on Ethernet 1/0/1, and no Up/Down log information is output for
Ethernet 1/0/1.
[Sysname-Ethernet1/0/1] undo enable log updown
[Sysname-Ethernet1/0/1] shutdown
[Sysname-Ethernet1/0/1] undo shutdown
flow-interval
Syntax
flow-interval interval
undo flow-interval
View
Ethernet port view
Parameter
Interval: Interval at which the interface collects statistics. It ranges from 5 to 300 seconds and must be a
multiple of 5.. The default is 300 seconds.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English