H3C S3100 Series

1-12
Examples
# Set the idle user checking interval to 500 seconds for Web authentication.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication timer idle-cut 500
web-authentication timer max-online
Syntax
web-authentication timer max-online timer
undo web-authentication timer max-online
View
System view
Parameters
Timer: Maximum online time specified for online users, in the range of 10 to 86400, in seconds. Value 0
means there is no limit to the online time of users.
Description
Use the web-authentication timer max-online command to set the maximum online time for online
users. If a user does not log off after the online timer expires, the switch will log off the user forcibly.
Use the undo web-authentication timer max-online command to restore the default.
By default, the maximum online time for users is 1800 seconds.
Examples
# Set the maximum online time of users to 36000 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication timer max-online 36000
web-authentication web-proxy port
Syntax
web-authentication web-proxy port port-number
undo web-authentication web-proxy port { port-number | all }
View
System view
Parameters
web-proxy port port-number: Specifies a proxy server port for web authentication, in the range 1 to
65535.
all: Deletes all proxy server ports for web authentication.
Description
Use the web-authentication web-proxy port command to configure a proxy server port for web
authentication.