1-10
dot1x handshake secure
Syntax
dot1x handshake secure
undo dot1x handshake secure
View
Ethernet port view
Parameter
None
Description
Use the dot1x handshake secure command to enable the handshaking packet secure function,
preventing the device from attacks resulted from simulating clients.
Use the undo dot1x handshake secure command to disable the handshaking packet secure function.
By default, the handshaking packet secure function is disabled.
For the handshaking packet secure function to take effect, the clients that enable the function need to
cooperate with the authentication server. If either the clients or the authentication server does not
support the function, disabling the handshaking packet secure function is needed.
Example
# Enable the handshaking packet secure function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x handshake secure
dot1x mandatory-domain
Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
View
Ethernet Interface view
Parameters
domain-name: ISP domain name, a case-insensitive string of 1 to 128 characters.
To Next Page
Loading...
Need help?
General