1-15
View
System view
Parameters
vlan vlan-id: VLAN ID, in the range of 1 to 4094.
Description
Use the igmp-snooping vlan-mapping vlan command to configure to transmit IGMP general and
group-specific query messages in a specific VLAN.
Use the undo igmp-snooping vlan-mapping command to restore the default.
By default, the VLAN tag carried in IGMP general and group-specific query messages is not changed.
Examples
# Configure IGMP general and group-specific query messages to be transmitted in VLAN 2.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname] igmp-snooping enable
[Sysname] igmp-snooping vlan-mapping vlan 2
igmp host-join
Syntax
igmp host-join group-address [source-ip source-address] vlan vlan-id
undo igmp host-join group-address [source-ip source-address] vlan vlan-id
View
Ethernet port view
Parameters
group-address: Address of the multicast group to join.
source-address: Address of the multicast source to join. You can specify a multicast source address
only when IGMPv3 Snooping is running in a VLAN.
vlan vlan-id: ID of the VLAN to which the port belongs, in the range of 1 to 4094.
Description
Use the igmp host-join command to configure the current port as a simulated multicast group member
host to join the specified multicast group or source and group.
Use the undo igmp host-join command to remove the current port as a simulated member host for the
specified multicast group or source-group.
Unlike a static member port, a port configured as a simulated member host will age out like a dynamic
member port.
Related commands: igmp-snooping enable, multicast static-group interface, multicast
static-group vlan
To Next Page
Loading...
Need help?
General