1-8
Examples
# Set the CRL update period to 20 hours.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl update-period 20
crl url
Syntax
crl url url-string
undo crl url
View
PKI domain view
Parameters
url-string: URL of the CRL distribution point, a case-insensitive string of 1 to 255 characters in the format
of ldap://server_location or http://server_location, where server_location must be an IP address and
does not support domain name resolution currently.
Description
Use the crl url command to specify the URL of the CRL distribution point.
Use the undo crl url command to remove the configuration.
By default, no CRL distribution point URL is specified.
Note that when the URL of the CRL distribution point is not set, you should acquire the CA certificate
and a local certificate, and then acquire a CRL through SCEP.
Examples
# Specify the URL of the CRL distribution point.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl url ldap://169.254.0.30
display pki certificate
Syntax
display pki certificate { { ca | local } domain domain-name | request-status }
View
Any view
Parameters
ca: Displays the CA certificate.
local: Displays the local certificate.
domain-name: Name of the PKI domain, a string of 1 to 15 characters.
To Next Page
Loading...
Need help?
General