2-17
Before configuring this command in a VLAN, enable MLD Snooping in the VLAN.
Related commands: mld-snooping enable.
Examples
# Enable MLD Snooping and then MLD Snooping Proxying in VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping proxying enable
mld-snooping querier
Syntax
mld-snooping querier
undo mld-snooping querier
View
VLAN view
Default Level
2: System level
Parameters
None
Description
Use the mld-snooping querier command to enable the MLD snooping querier function.
Use the undo mld-snooping querier command to disable the MLD snooping querier function.
By default, the MLD snooping querier function is disabled.
Note that: This command takes effect only if MLD snooping is enabled in the VLAN.
Related commands: mld-snooping enable.
Examples
# Enable MLD snooping and the MLD snooping querier function in VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping querier
mld-snooping query-interval
Syntax
mld-snooping query-interval interval
undo mld-snooping query-interval
To Next Page
Loading...
Need help?
General