H3C S3100 Series Command Manual

1-4
Table 1-2 display oam remote interface command output description
Field Description
Port
Port index
Link Status
Link status
Information of the latest received
OAM packet
Information about the latest received Ethernet OAMPDU
OAMRemoteMACAddress
MAC address of the Ethernet OAM peer
OAMRemotePDUConfiguration
Maximum Ethernet OAMPDU size allowed
OAMRemoteState
State of the Ethernet OAM peer
Remote_mux_action
Peer sending mode. Refer to
Table 1-1 for more.
Remote_par_action
Peer receiving mode. Refer to
Table 1-1 for more.
OAMRemoteConfiguration
Configuration of the peer Ethernet OAM entity
OAM Mode
Ethernet OAM mode
Unidirectional Support
Indicates whether unidirectional transmission is supported (YES or NO)
Loopback Support
Indicates whether Ethernet OAM remote loopback is supported (YES or
NO)
Link Events
Indicates whether Ethernet OAM link error events are supported (YES or
NO)
Variable Retrieval
Indicates whether MIB variable retrieval is supported (YES or NO)
OAMRemoteFlagsField
Values of the peer Ethernet OAM flag fields in OAM packets
Link Fault
Indicates whether a link fault is present: 0 for no and 1 for yes.
Dying Gasp
Indicate whether a fatal fault is present: 0 for no and 1 for yes.
Critical Event
Indicate whether a critical fault is present: 0 for no and 1 for yes.
Local Evaluating
Indicates whether the local-to-remote configuration negotiation is
complete:
z COMPLETE for completed
z REVERSED for uncompleted
Remote Evaluating
Indicates whether the remote-to-local configuration negotiation is
complete:
z COMPLETE for completed
z REVERSED for uncompleted
display oam configuration
Syntax
display oam configuration
View
Any view
Default Level
2: System level

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English