1-2
EnableStatus : Enable
Local_oam_mode : Active Local_pdu : ANY
Local_mux_action : FWD Local_par_action : FWD
OAMLocalFlagsField :
--------------------------------------------------------------------------
Link Fault : 0 Dying Gasp : 0
Critical Event : 0 Local Evaluating : COMPLETE
Remote Evaluating : COMPLETE
Packets statistic :
Packets Send Receive
--------------------------------------------------------------------------
OAMPDU 645 648
OAMInformation 645 648
OAMEventNotification 0 --
OAMUniqueEventNotification -- 0
OAMDuplicateEventNotification -- 0
Table 1-1 display oam local command output description
Field Description
Port
Port index
Link Status
Link status
EnableStatus
Ethernet OAM state (enabled or disabled)
Local_oam_mode
Local Ethernet OAM mode, which can be:
z Active, indicating the port operates in the active Ethernet OAM mode
z Passive, indicating the port operates in the passive Ethernet OAM
mode
Local_pdu
The way in which the local end processes Ethernet OAMPDUs:
z RX_INFO, indicating the port only receives Information OAMPDUs
and does not send any Ethernet OAMPDUs.
z LF_INFO, indicating the port only sends the Information OAMPDUs
without Information TLV triplets and with their link error flag bits being
set.
z INFO, indicating the port sends and receives only Information
OAMPDUs.
z ANY, indicating the port sends and receives Ethernet OAMPDUs of
any type.
Local_mux_action
Working mode of the local transmitter, which can be:
z FWD, indicating the port can send any packets.
z DISCARD, indicating the port only sends Ethernet OAMPDUs.
Local_par_action
Working mode of the local receiver, which can be:
z FWD, indicating the port can receive any packets.
z DISCARD, indicating the port only receives Ethernet OAMPDUs.
z LB, indicating Ethernet OAM remote loopback is enabled on the port.
In this case, all the packets other than Ethernet OAMPDUs received
are returned to their sources along the ways they come.
OAMLocalFlagsField
Local flags inserted in the local flag fields of the Ethernet OAMPDUs
sent.