1-4
Description: VLAN 0001
Name: VLAN 0001
Tagged Ports:
Ethernet1/0/1
Untagged Ports:
Ethernet1/0/2
Table 1-2 Description on the fields of the display vlan command
Field Description
VLAN ID VLAN ID.
VLAN Type VLAN type (dynamic or static).
Route Interface
Indicates whether the VLAN interface of the VLAN is configured with an
IP address for routing.
IP Address
Primary IP address of the VLAN interface (available only on a VLAN
interface configured with an IP address). You can use the
display
interface vlan-interface
command in any view or the
display this
command in VLAN interface view to display its secondary IP
address(es), if any.
Subnet Mask Subnet mask of the IP address of the VLAN interface.
Description Description of the VLAN.
Name VLAN name.
Tagged Ports Ports out of which packets are sent tagged.
Untagged Ports Ports out of which packets are sent untagged.
interface Vlan-interface
Syntax
interface Vlan-interface vlan-id
undo interface Vlan-interface vlan-id
View
System view
Parameters
vlan-id: Specifies the ID of a VLAN interface, in the range of 1 to 4094.
Description
Use the interface Vlan-interface command to create the VLAN interface for a VLAN and enter VLAN
interface view.
Use the undo interface Vlan-interface command to delete a VLAN interface.
You can create a VLAN interface only for an existing VLAN and must ensure that the ID of the VLAN
interface is the same as the VLAN ID.
You can use the ip address command in VLAN interface view (refer to the IP Address and Performance
Command part for the command description) to configure an IP address for this VLAN interface to
enable it to route packets for the devices in the corresponding VLAN.
Related commands: display interface Vlan-interface.
To Next Page
Loading...
Need help?
General