H3C S3100 Series Command Manual

2-2
Field Description
Sampling interval
Sampling interval, in seconds. The system
performs absolute or delta sampling on the
sampled node at this interval.
Rising threshold
Rising threshold. When the sampled value
equals or exceeds the rising threshold, an alarm
is triggered.
Falling threshold
Falling threshold. When the sampled value
equals or falls under the falling threshold, an
alarm is triggered.
When startup enables
The condition under which an alarm is triggered,
which can be:
z risingOrFallingAlarm: An alarm is triggered
when the rising or falling threshold is
reached.
z risingAlarm: An alarm is triggered when the
rising threshold is reached.
z FallingAlarm: An alarm is triggered when the
falling threshold is reached.
Latest value The value of the latest sample
display rmon event
Syntax
display rmon event [ event-entry ]
View
Any view
Parameters
event-entry: RMON event entry index, in the range 1 to 65535. If you do not specify the event-entry
argument, the configuration of all the RMON event entries is displayed.
Description
Use the display rmon event command to display the configuration of a specified RMON event entry.
RMON event information includes the following:
z Event entry index
z Event entry owner
z Event description
z The action triggered by the event (log or alarm messages)
z The time (in seconds) when the latest event is triggered (in terms of the time elapsed since the
system is started/initialized).
Related commands: rmon event.
Examples
# Display the configuration of all the RMON event entries.
<Sysname> display rmon event

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English