H3C S3100 Series - Display Web Users

1-8
Examples
# Display the user information about the current user interface.
<Sysname> display users
UI Delay Type Ipaddress Username Userlevel
+ 1 VTY 0 00:00:00 TEL 192.168.0.208 3
+ : Current operation user.
F : Current operation user work in async mode.
Table 1-3 display users command output description
Field Description
UI
The numbers in the left sub-column are the absolute user interface
indexes, and those in the right sub-column are the relative user
interface indexes.
Delay The period (in seconds) the user interface idles for.
Type User type
Ipaddress The IP address from which the user logs in.
Username The login name of the user that logs into the user interface.
Userlevel
The level of the commands available to the users logging in to the
user interface
F
The information is about the current user interface, and the current
user interface operates in asynchronous mode.
+ The user interface is in use.
display web users
Syntax
display web users
View
Any view
Parameters
None
Description
Use the display web users command to display the information about the current on-line Web users
(management users that log in to the switch through the Web interface).
Examples
# Display the information about the current on-line Web users.
<Sysname> display web users
ID Name Language Level Login Time Last Req. Time
00800003 admin English Management 06:16:32 06:18:35