2-1
2 QoS Profile Configuration Commands
Only H3C S3100-EI series switches support this configuration.
QoS Profile Configuration Commands
apply qos-profile
Syntax
In system view
apply qos-profile profile-name interface interface-list
undo apply qos-profile profile-name interface interface-list
In Ethernet port view
apply qos-profile profile-name
undo apply qos-profile profile-name
View
System view, Ethernet port view
Parameter
profile-name: QoS profile name, a case-insensitive string of 1 to 32 characters and starting with English
letters [a-z, A-Z].
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argument
in the form of interface-type interface-number [ to interface-type interface-number ].
Description
Use the apply qos-profile command to apply a QoS profile to a port or multiple ports.
Use the undo apply qos-profile command to remove a QoS profile from a port or multiple ports.
In Ethernet port view, you can apply a QoS profile to the current port; in system view, you can apply a
QoS profile to multiple ports.
Example
# Apply the QoS profile named a123 to Ethernet 1/0/1.
<Sysname> system-view
To Next Page
Loading...
Need help?
General