1-18
Related commands: rsa peer-public-key, public-key peer, public-key-code end.
Examples
# Enter public key edit view and input a public key.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rsa peer-public-key Switch003
RSA public key view: return to System View with "peer-public-key end".
[Sysname-rsa-public-key] public-key-code begin
RSA key code view: return to last view with "public-key-code end".
[Sysname-rsa-key-code] 308186028180739A291ABDA704F5D93DC8FDF84C427463
[Sysname-rsa-key-code] 1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[Sysname-rsa-key-code] D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[Sysname-rsa-key-code] 0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[Sysname-rsa-key-code] C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[Sysname-rsa-key-code] BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[Sysname-rsa-key-code] public-key-code end
[Sysname-rsa-public-key]
public-key-code end
Syntax
public-key-code end
View
Public key edit view
Parameters
None
Description
Use the public-key-code end command to return from public key edit view to public key view and save
the public key you input.
After you use this command to end editing the public key, the system will check the validity of the public
key before saving the key.
z If there is any illegal character in the key, your configuration fails. In this case, a prompt is displayed
and the key is discarded.
z If the key is valid, it is saved in the local public key list.
Related commands: rsa peer-public-key, public-key peer, public-key-code begin.
Examples
# Exit public key edit view and save the public key you input.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rsa peer-public-key Switch003
RSA public key view: return to System View with "peer-public-key end".
To Next Page
Loading...
Need help?
General