3-1
3 IPv6 Multicast VLAN Configuration Commands
IPv6 Multicast VLAN Configuration Commands
Only the S3100-EI series support IPv6 multicast VLAN configuration commands.
display multicast-vlan ipv6
Syntax
display multicast-vlan ipv6 [ vlan-id ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan-id: VLAN ID of an IPv6 multicast VLAN, in the range of 1 to 4094. If this argument is not provided,
the information about all IPv6 multicast VLANs will be displayed.
Description
Use the display multicast-vlan ipv6 command to view the information about the specified IPv6
multicast VLAN or all IPv6 multicast VLANs.
Examples
# View the information about all IPv6 multicast VLANs.
<Sysname> display multicast-vlan ipv6
Total 1 IPv6 multicast-vlan(s)
IPv6 Multicast vlan 100
port list:
Eth1/0/1 Eth1/0/2
Table 3-1 display multicast-vlan ipv6 command output description
Field Description
Total 1 IPv6 multicast-vlan(s) Total number of IPv6 multicast VLANs
IPv6 Multicast vlan An IPv6 multicast VLAN
port list Port list of the IPv6 multicast VLAN
To Next Page
Loading...
Need help?
General