H3C S3100 Series

1-1
1 Voice VLAN Configuration Commands
The contents of this chapter are only applicable to the S3100-EI series among S3100 series switches.
Voice VLAN Configuration Commands
display voice vlan error-info
Syntax
display voice vlan error-info
View
Any view
Parameters
None
Description
Use the display voice vlan error-info command to display the ports on which the voice VLAN function
fails to be enabled.
When ACL number applied to a port reaches to its threshold, voice VLAN cannot be enabled on this
port.
Examples
# Display the ports on which voice VLAN fails to be enabled.
<Sysname> display voice vlan error-info
Fail to apply voice VLAN ACL rules to the following port(s):
Ethernet1/0/10 Ethernet1/0/15
display voice vlan oui
Syntax
display voice vlan oui