H3C S3100 Series Command Manual

1-20
Description
Use the hwping command to create an HWPing test group and enter HWPing test group view. If the
specified HWPing test group already exists, this command leads you to HWPing test group view
directly.
Use the undo hwping command to delete an HWPing test group.
Examples
# Create an HWPing test group of which the administrator name is administrator and operation tag is
icmp.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp]
hwping-agent clear
Syntax
hwping-agent clear
View
System view
Parameters
None
Description
Use the hwping-agent clear command to clear all agents on the HWPing client.
Examples
# Clear all currently configured agents.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping-agent clear
hwping-agent enable
Syntax
hwping-agent enable
undo hwping-agent enable
View
System view
Parameters
None
Description
Use the hwping-agent enable command to enable the HWPing client function.
Use the undo hwping-agent enable command to disable the HWPing client function.
By default, the HWPing client function is disabled.
You can perform tests only after you enable the HWPing client function.
Related commands: hwping-server enable.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English