2-9
Field Description
Cluster The role of the collected device for the cluster
Peer MAC
MAC address of a neighbor device connected to
the collected device
Peer Port ID
Index of the port on the neighbor device
connected to the collected device
Native Port ID
Index of the port on the collected device
connected to the neighbor device
Speed Speed of the neighbor device port
Duplex Duplex mode of the neighbor device port
ntdp enable
Syntax
ntdp enable
undo ntdp enable
View
System view, Ethernet port view
Parameters
None
Description
Use the ntdp enable command to enable NTDP globally or on a port.
Use the undo ntdp enable command to disable NTDP globally or on a port.
By default, NTDP is enabled both globally and on ports.
Note that NTDP can take effect on a port only when NTDP is enabled both globally and on the port.
Examples
# Enable NTDP globally, and then enable NTDP on port Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ntdp enable
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] ntdp enable
ntdp explore
Syntax
ntdp explore
View
User view
To Next Page
Loading...
Need help?
General