EasyManuals Logo

H3C S3100 Series Command Manual

H3C S3100 Series
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #306 background imageLoading...
Page #306 background image
1-17
Examples
# Configure ports Ethernet 1/0/1 to Ethernet 1/0/3 under VLAN-interface 1 as static members ports for
multicast group 225.0.0.1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] multicast static-group 225.0.0.1 interface Ethernet 1/0/1 to
Ethernet 1/0/3
multicast static-group vlan
Syntax
multicast static-group group-address vlan vlan-id
undo multicast static-group group-address vlan vlan-id
View
Ethernet port view
Parameters
group-address: IP address of the multicast group to join, in the range of 224.0.0.0 to 239.255.255.255.
vlan vlan-id: Specifies the VLAN the Ethernet port belongs to, where vlan-id ranges from 1 to 4094.
Description
Use the multicast static-group vlan command to configure the current port as a static member port for
the specified multicast group and specify the VLAN the port belongs to.
Use the undo multicast static-group vlan command to remove the current port in the specified VLAN
as a static member port for the specified multicast group.
By default, no port is configured as a static multicast group member port.
Note that:
The impact of the configuration depends on whether the current port belongs to a multicast VLAN and
whether the port belongs to the specified VLAN.
z If the current port belongs to neither a multicast VLAN nor the specified VLAN, the configuration
does not take effect.
z If the current port does not belong to any multicast VLAN but it belongs to the specified VLAN, the
configuration takes effect in the specified VLAN.
z If the current port belongs to a multicast VLAN, the configuration takes effect only in the multicast
VLAN no matter the port belongs to the specified VLAN or not.
Examples
# Configure port Ethernet1/0/1 in VLAN 2 as a static member port for multicast group 225.0.0.1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] multicast static-group 225.0.0.1 vlan 2

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals