H3C S3100 Series Command Manual

3-10
Examples
# Display the currently measured value of digital diagnosis parameters of the anti-spoofing pluggable
optical transceiver customized by H3C on interface GigabitEthernet 1/2/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 1/2/2
GigabitEthernet1/2/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V) Bias(mA) RX power(dBM) TX power(dBM)
35 3.26 6.18 -35.64 -5.17
Table 3-7 Description on the fields of display transceiver diagnosis interface
Field Description
transceiver diagnostic information Digital diagnosis information of the transceiver carried by an interface
Current diagnostic parameters Current diagnostic parameters
Temp.(°C)
Digital diagnosis parameter-temperature, in °C, with the precision to
1°C.
Voltage(V) Digital diagnosis parameter-voltage, in V, with the precision to 0.01 V.
Bias(mA)
Digital diagnosis parameter-bias current, in mA, with the precision to
0.01 mA.
RX power(dBM)
Digital diagnosis parameter-RX power, in dBM, with the precision to
0.01 dBM.
TX power(dBM)
Digital diagnosis parameter-TX power, in dBM, with the precision to
0.01 dBM.
display transceiver interface
Syntax
display transceiver interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver interface command to display main parameters of a single or all
transceivers.
Examples
# Display main parameters of the pluggable transceiver on interface GigabitEthernet 1/1/2.
<Sysname> display transceiver interface gigabitethernet 1/1/2
GigabitEthernet1/1/2 transceiver information:
Transceiver Type : 1000_BASE_LX_SFP
Connector Type : LC
Wavelength(nm) : 1310
Transfer Distance(km) : 10(9um)
Digital Diagnostic Monitoring : YES
Vendor Name : H3C

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English