EasyManuals Logo

H3C S3100 Series Command Manual

H3C S3100 Series
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #950 background imageLoading...
Page #950 background image
3-11
Ordering Name : SFP-GE-LX10-SM1310
Table 3-8 Description on the fields of the display transceiver interface command
Field Description
transceiver information Transceiver information of the interface
Transceiver Type Transceiver type
Connector Type
Type of the connectors of the transceiver:
z Optical connectors, including SC (SC connector, developed by NTT)
and LC (LC connector, 1.25 mm/RJ45 optical connector developed
by Lucent).
z Other connectors, including RJ-45 and CX4.
Wavelength(nm)
z Optical transceiver: central wavelength of the laser sent, in nm. If the
transceiver supports multiple wavelengths, every two wavelength
values are separated by a comma.
z Electrical transceiver: displayed as N/A.
Transfer distance(xx)
Transfer distance, with xx representing km for single-mode transceivers
and m for other transceivers. If the transceiver supports multiple transfer
medium, every two values of the transfer distance are separated by a
comma. The corresponding transfer medium is included in the bracket
following the transfer distance value. The following are the transfer
media:
z 9 um: 9/125 um single-mode fiber
z 50 um: 50/125 um multi-mode fiber
z 62.5 um: 62.5/125 um multi-mode fiber
z TP: Twisted pair
z CX4: CX4 cable
Digital Diagnostic Monitoring
Whether the digital diagnosis function is supported, where:
z YES: supported
z NO: not supported
Vendor Name
Vendor name or vendor name specified of the transceiver:
z The anti-spoofing transceiver customized by H3C: H3C is displayed.
z Other transceivers: The original vendor name is displayed.
Ordering Name Ordering name of the transceiver
display transceiver manuinfo interface
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver manuinfo interface command to display part of the electrical label
information of a single or all anti-spoofing pluggable transceivers customized by H3C.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals