1-23
reset dot1x statistics
Syntax
reset dot1x statistics [ interface interface-list ]
View
User view
Parameter
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the reset dot1x statistics command to clear 802.1x-related statistics.
To retrieve the latest 802.1x-related statistics, you can use this command to clear the existing
802.1x-related statistics first.
When you execute this command,
If the interface-list argument is not specified, this command clears the global 802.1x statistics and the
802.1x statistics on all the ports.
If the interface-list argument is specified, this command clears the 802.1x statistics on the specified
ports.
Related command: display dot1x.
Example
# Clear 802.1x statistics on Ethernet 1/0/1 port.
<Sysname> reset dot1x statistics interface Ethernet 1/0/1
To Next Page
Loading...
Need help?
General